Your rig. One app. Nobody stuck at the console.
An application that hears the music and drives your DMX lighting in real time - with the fixtures already hanging in your venue.
Hear the beat. Name the part of the track. Light it.
That loop closes a few hundred times a minute, all night, without anyone deciding anything.
Tempo and beat from the audio input, accurate to a few milliseconds. No timecode, no MIDI clock, no tracklist.
Silence, breakdown, drop, mid-section - named as they happen, with the dynamics chosen to match.
One sequence fires and describes the entire rig at once, so the whole venue moves as a single picture.
Universal profiles, so the same sequence plays on anybody's fixtures.
Nothing here has to be bought. If it speaks DMX and hangs in your venue, it belongs in the patch.
Picking a mode is not just swapping the sequences assigned to it. Above all it swaps the beat-detection algorithm, and that algorithm is different for every kind of music.
A four-on-the-floor kick, a broken drum & bass pattern and distorted schranz at 150–170 BPM are not read the same way. HARD TECHNO, for one, reads the state of the track from the pulse of the kick, because in schranz the sub-bass gives nothing away. Each mode listens on its own terms - switch it when the DJ switches genre and the detection follows.
Now meet the app that runs the night.
There are four things to see: what the app hears, where your fixtures hang, manual control for a live band, and the remote in your pocket. The first one is the app thinking out loud.
It re-reads the track several times a second
The analysis never stops: tempo locked to the beat, and the state of the track named the moment it changes - build, breakdown, drop, the quiet middle. Every state has its own sequences, so when the track turns, the rig turns with it. The coloured bars show the last few dozen of those readings.
See every fixture, live
Beams drawn as they are sent, fixtures dragged to where they hang in the venue, and the universe and channel range on every device in the patch - so what you read on the plan is what is on the wire.
Take manual control when the band plays
The one mode that does not listen: the analysis stops and you set the lighting by hand - heads on a joystick, bars, PARs and every other fixture - and it holds exactly like that until you change it.
The whole venue, from your pocket
The everyday controls run from a phone or a tablet: mode, dynamics, colour, brightness, muting whole fixture groups, NOW PLAYING and blackout. All it needs is the same Wi-Fi as the Mac - no extra hardware, nothing installed.
Pair by scanning a QR code, enter a PIN, and the connection is encrypted.
The lights are not the only thing that follows the music.
The same engine that drives the rig also drives the screen. Over 50 built-in visuals react to the audio in the venue, and anything you add of your own is locked to the detected tempo - so the wall behind the DJ hits the beat the fixtures hit.
Audio-reactive effects
Built in and driven by the same analysis as the lighting, so they move with the track rather than on a timer. The library keeps growing with every update.
Your own clips, on tempo
Drop in video the venue already owns and it plays synchronised to the detected tempo instead of drifting against it.
Any logos you want on the wall
The venue's mark, a promoter's, a sponsor's - whatever the night calls for. Next to it, a banner with the name of the DJ currently playing, swapped between sets rather than between events.
Six things that matter on site.
Works with the fixtures you already own
Universal profiles across manufacturers.
Learns your venue
Aim the heads at a few points on the floor once; every sequence then knows where the floor is.
Plays offline
Up to 30 days with no internet.
Control it from your phone
QR code, encrypted link, PIN.
Visuals on a second screen
Audio-reactive effects, your clips on tempo, club logo, DJ banner.
Manual mode for live bands
CONCERT mode: no audio analysis, the whole rig set by hand.
Where it runs.
Pricing
One licence covers one workstation, with every update, support and offline operation included. Deployment is quoted separately, once.
Billed monthly. Cancel at any time.
- Licence for one workstation
- All updates
- Support
- Offline operation up to 30 days
Equivalent to 833 PLN / month - save 1 989 PLN.
- Licence for one workstation
- All updates
- Support
- Offline operation up to 30 days
Configuration for your rig, fixture profiles, head calibration and sequences prepared around what the venue plays. Quoted per venue, paid once.
Tell us about the venue.
Fill in the form so we know who you are and what you need. We will come back to you with an answer.
Thank you - we have it.
We have your message. We will read it and come back to you with an answer as soon as we can.